Deejify Analyze my tracks

How the analysis works

Last updated 12 November 2026

Short version: your audio is decoded and analyzed inside your browser tab. Deejify measures tempo, key, energy and cue points with signal processing, not with a model trained on your music. It is good at clear four-on-the-floor tracks and it can be wrong on others. We have not measured an accuracy number on real tracks, so we do not quote one.

Where it runs

The file is read and decoded by your browser, analyzed on your device and discarded. The audio is not sent to our servers. If you are signed in and save the track, we store the readouts only: track name, BPM, key, energy, length and cue times.

Tempo (BPM)

The track is reduced to a loudness envelope and Deejify looks for the repeat interval that best lines up with the pulse, an autocorrelation approach. The result is rounded to one decimal place. A bar grid is then laid over the track from that tempo.

Known failure cases: tracks that read at half or double the tempo you feel (common in drum and bass, half-time hip hop and slow house); breakbeats and swung rhythms with a weak pulse; tracks whose tempo drifts or changes; very short clips; and live recordings.

Key

Deejify measures how much energy sits on each of the 12 pitch classes (a chroma profile) and compares it to major and minor key profiles using the Krumhansl-Schmuckler method. The best match is shown in Camelot notation, such as 8A or 4B, with the key name beside it.

Known failure cases: relative major and minor keys (they share notes, so 8A and 8B can be confused); tracks with no clear tonal centre, such as percussion-heavy or atonal tracks; tracks that modulate; heavy detuning; and bass-dominated mixes where a sub bass hides the harmony. Cross-check tricky tracks by ear.

Energy

Energy is a 0 to 100 score built from four things measured on the louder 70% of the track: how bright it is (high frequency content), how much the loudness pulses, the tempo, and, with a light weight, the overall level. Loudness is weighted lightly because modern masters are all loud and it would not tell tracks apart. Below 40 is labelled low, 40 to 59 mid and 60 and up high.

The set builder also ranks tracks against each other inside the set, so a set of loud tracks still gets a shape. The score thresholds have not been calibrated on a large library, so treat energy as a relative guide, not a fixed measurement.

Cue points

With the tempo known, Deejify measures the low and mid frequency energy of every bar and marks the bars where both are near their usual top level as full energy. The start of a full-energy run becomes a drop, and the quieter stretches before it are labelled as a build or a breakdown. See cue points for editing and export.

Known failure cases: tracks with no clear sections; very loud breakdowns; tracks with a long fade intro or outro; and tracks whose tempo reading was wrong, because the bar grid then drifts.

Reading a result

Say a readout shows 126 BPM, 8A, energy 62 (high). That says: a tempo typical of house, in A minor, with bright, pulsing content. The set builder would treat it as a good neighbour for another track in 8A, 7A or 9A, or in 8B, within a few BPM, which is the Camelot rule for keys that mix cleanly. This is an illustration of how to read the numbers, not the result of a real track.

Before you rely on a result: tap along and compare the BPM, check that the cues land on the bars you expect, and play the key against the neighbouring track. If a number is off, move the cue or correct it in your own notes. Your cue corrections stay.

What is not measured yet

If you find a track Deejify gets wrong, email us the case. Real failures are the best way to make it better.